Skip to content

This page mirrors Slek's in-app contextual help, available any time via the ? button

Planned Session

Premium feature
After planning the season, planning each training session is what makes you progress.

1. Session bar

At the top of the page, you have a row of large buttons:
  • ‹ Calendar (or ‹ Dashboard) closes the page. If you have unsaved changes, the button turns red and Slek offers to save them.
  • Save saves the session and closes the page. The Ctrl+S shortcut (⌘S on a Mac) saves without closing.
  • The actions of the session:
    • Perform the workout: enter the activity of the session, when you did it without a measuring device
    • Individualize: edit a squad session for yourself; it then no longer follows the squad's plan
    • Share the workout with other athletes
    • Recurrence: repeat the session in the following weeks
    • Copy the workout, to paste it on another day
    • Add to my library
    • Delete
On a wide screen, each action has its button. On a phone, they are in the menu, along with Print, Raw text mode and Help.
Note: If you open a planned session from the dashboard, only the Perform the workout and Delete actions are offered.

2. Session targets

For each planned session (whether in the library or not), you can define the targets of your session (duration, distance, D+, HR zones or pace...). On this device, Slek remembers for each sport the targets you turned on. The duration also accepts a range, for example 1h - 2h.
If you use Foster load, it's wise to always include duration and expected effort in your targets because this allows Slek to calculate a planned Foster load and to be able to:

3. Session description

The session description seems very simple, yet it allows:
  • very practical formatting to use,
  • to incorporate a YouTube video (which would contain the description of your exercise) by simple copy-paste,
  • to define guided sessions sent to the watches.
Sometimes this intelligent description field can bother you if you're used to writing your repetitions with the * sign (which is understood as a bullet list). In these cases you can activate raw text mode using the button and all these features will be disabled.
The Markdown syntax is a standard format... you can ask your favorite AI to format a session in Markdown format: you'll be surprised by the result.

4. Description button bar

Above the description, two tabs: Editing to write, and View to read the session as your athlete does.
In editing, the button bar offers:
  • Print: prepares a PDF of the session.
  • Undo and Redo.
  • Attach a file: a PDF, an image…, up to 20 MB. You can also drop the file on the text.
  • Save the selection as a snippet: keeps the selected text in your snippets (see below). In a guide, the button becomes Add to My intervals.
  • Raw text mode: the description is written without formatting (see above).
  • Formatting: Heading (heading 1, heading 2 or normal text), Bold, Italic, Bulleted list, Numbered list, Note, Link and Clear formatting. These buttons write the Markdown for you; they do not apply to the lines of a guide.
  • Insert a guided workout: adds an empty advanced guide at the end of the description. If the description has a simple guide, the button becomes Convert to an advanced guided workout.
  • Explanations: the cheat sheet (keyboard shortcuts and simple guides).

5. Snippets

A snippet is a block of text you are tired of typing again from one session to the next: a standard warm-up, instructions, a reminder… Your snippets are yours: you find them in every session you write, whatever the calendar.
  • Create a snippet: select text in the description, then click Save the selection as a snippet. The suggested title takes the first three words of the selection. The suggested tags are the ones checked in the Snippets tab. You can change both.
  • Find a snippet: the most used come first. The tag of the sport of the session is already checked: you see the snippets of that sport and those without a sport tag.
  • Insert: the snippet goes to the line of the cursor (after the guide if the cursor is in it). Undo, in the message that shows, removes it.
  • Deleting a snippet ( menu) does not touch the sessions where you inserted it.
Without leaving the keyboard: type // to pick a snippet from a list. The list follows the tags checked in the Snippets tab.

6. Intervals

The Intervals tab builds the advanced guide without writing its syntax.
  • Target: the metric of the blocks you insert (RPE, HR, speed or power, as a %, in zones or as an absolute value). Absolute values come from the references of the athlete: they are offered neither in squad mode nor in the library.
  • Slek intervals: Insert places the block at the cursor in the guide, or at the end of the guide. If there is no guide yet, Slek creates it.
  • My intervals: your own guide lines. Select lines in a guide, then click Add to My intervals.
A simple guide ((…)), on a single line, does not allow these edits: first convert it with Convert to an advanced guided workout.
Inside a section of a guide, // also offers the Slek intervals and your intervals.

7. Keyboard shortcuts

On a Mac, ⌘ replaces Ctrl and ⌥ (Option) replaces Alt. Redo is ⇧⌘Z.
ShortcutAction
Ctrl+SSave the planned session without closing it
Alt+EnterOpen the settings of the line of the guide
Ctrl+Z / Ctrl+YUndo / redo
Ctrl+BBold
Ctrl+IItalic
Ctrl+KInsert a link
Alt+↑ / Alt+↓Move the line up / down
Shift+Alt+↑ / Shift+Alt+↓Duplicate the line
Shift+Ctrl+KDelete the line
Ctrl+Enter in a commentSend the comment
And to insert content without leaving the keyboard, at the start of a line, type:
ShortcutAction
((Add an advanced guide
// outside a guideInsert a saved text snippet
// in a guideInsert an interval

8. Guided Sessions

A guided session will be sent to the athlete’s watch to guide them through each effort (except on Polar).
This is what others call “structured sessions” (as if your other sessions weren’t).
Slek sends the session to Garmin, Suunto, Coros, Wahoo and Hammerhead (cycling only) watches and bike computers as soon as you save it (for a draft, as soon as it is published), then removes it from the manufacturer's app one week after its date. In view mode, the button of the guide tells you, for each brand, whether the sending succeeded.
A session planned more than one month ahead is not sent: save it again when it gets closer so that it goes out.
There are two kinds of guide, both written between ((...)):
  • a simple guide (on a single line), quick, with no targets;
  • an advanced guide (over several lines), with pace, power or heart-rate targets, distance steps and repeated blocks. Editable with a very simple graphical builder (use the button)
The line break tells them apart. An advanced guide must be on its own in the session.

Simple guides

The cheat sheet of the Explanations button, above the description, recalls this syntax.
Defined on a single line between ((...)), they describe sets of efforts and recoveries, with no targets.
Examples:
  • ((2x 10x 30/30 R2))
    2 sets of 10 times 30" / 30" with 2' recovery between sets
  • ((2x 1 2 3 2 1 r/2 R2))
    2 pyramids 1' 2' 3' 2' 1' with half recovery after each effort and 2' recovery between sets
Rules:
  • You can specify durations with a unit (s, m, ' or "), but by default one digit means minutes and two digits mean seconds.
  • Recovery between efforts is written with a lowercase r, recovery between sets with an uppercase R.
  • It is either an absolute duration (r3 or R3 => 3' recovery), or a relative duration (r/2 or R/2 => half the previous effort duration).
  • It can also be written right after the effort duration (twenty seconds recovery in 30/20).
  • Recovery sits between two efforts, not after, so on 30/15, after the last fast 30 you go straight to the recovery between sets.
  • You can chain as many simple guides as you want in the same session description, for example
    Start with ((10x1/30)) and after a good recovery, continue with ((10x30/30))…
  • Slek automatically adds warm-up and cool-down steps at the start and end of the session, and also between each guide. These steps are of indeterminate duration, meaning they last until the LAP button is pressed.
A simple guide does not allow targets (speed, power, …). This is on purpose, to keep things simple and let the athlete rely on their feel: they will therefore have to remember the objectives of each effort. If you want targets, switch to the advanced guide.

Advanced guides

The advanced guide adds targets (pace, power, HR), a progressive warm-up, repeated blocks and distance steps.
The simplest is to use the graphical builder. As soon as the description holds an advanced guide, the timeline of the session shows under the description: in editing, you drag your blocks onto it from the palette and set duration/distance and targets. Slek writes the guide for you: no need to know the syntax.
In the text, each line of the guide has an Adjust button in the margin: it opens the settings of the step (duration or distance, target…), moves it, duplicates or deletes it.
Percentage and zone targets depend on the athlete's references (VMA, FTP, max HR...). If one is missing, Slek tells you above the guide, and the step is sent to the watch without its target.

9. Advanced guide syntax

This section details the text syntax of advanced guides, for those who would rather write it by hand than use the graphical builder (recommended). An advanced guide is written over several lines, between ((...)).
Example, running:
((
Warmup
- 2km 70-75% pace
- 2km 75-80% pace

Main set 2x
- 6km 90-92% pace
- 2km 75-80% pace

Cooldown
- 2km 72-76% pace
))

Structure

  • A line without a dash opens a section (for example Warmup or Main set).
  • A line that starts with - is a step.
  • A repeated section uses Nx at the end of its header (Main set 2x) or on its own line (5x). Nested repeats are not supported.
  • Sections named Warmup and Cooldown are recognized (in English, like the target keywords) and set the intensity accordingly.
  • Each step’s intensity (effort or recovery) is inferred from its target. You can force a step to recovery by writing recovery or rest in its name.
  • A text line right under a header becomes a section note.

Step duration or distance

Every step must give a duration or a distance (this is required).
  • Time: 1h, 1h10 (1 h 10 min), 10m (minutes), 30s, 1m30, 5', 1'30", 45". To avoid any ambiguity with the metres shortcut below, prefer ' for minutes whenever you can (10' rather than 10m).
  • Distance: 2km, 1.5km, 1mi, 4.5mi, 400m. A bare N m is metres when N is greater than or equal to 60, otherwise minutes (400m is 400 metres, 59m is 59 minutes, 60m is 60 metres, so use 1h or 60' for 60 minutes).
  • Always put a unit on the duration. A bare number (5) is treated as text, not as a duration.

Step ending on LAP

For a step that ends when you press the LAP button, add the word lap to its name. A duration is still required, but it is only indicative: the step ends the moment you press LAP, whether you are below or above that value. On the rare watches that cannot end a step on LAP, the duration is used as a fallback.
- lap 20' 50% pace
The 20' is just a target shown on the watch, not a minimum nor a limit: pressing LAP at 18', 20' or 25' ends the step all the same. It is handy for a free warm-up: “warm up for about 20' and press LAP when you are ready to start”.

Targets

The target goes after the duration. Keywords are written in English (pace, HR, LTHR, ftp). A range is 95-105% or 50%-65%.
  • % alone: percentage of FTP (power) for cycling, of VO2max speed (VMA) for running.
  • % pace: percentage of VMA. % HR: percentage of max HR. % LTHR: percentage of threshold HR. % ftp: percentage of FTP on any sport (for run power).
  • 220w or 200-240w: power in watts.
  • 90rpm or 70-100rpm: cadence (secondary target).
  • Z1 to Z9: a Slek zone, or a range of zones Z1-Z2. By default cycling gives a power zone, running a pace zone, other sports a HR zone. Z3 HR or Z4 Pace force the metric.
  • 4:28-4:32/km or 8:03/mi: explicit pace (/mi is converted).
  • 1-2 rpe or 2 rpe: perceived effort on the 1 to 10 scale.
  • ramp 50%-75%: the target ramps up over the step (for example 10m ramp 50%-75% 85rpm).
  • freeride: an ERG-off cycling block (free resistance, trainer).
A single-value target (for example 90% HR or 250w) is sent to the watch as a small range around that value, to avoid a single-point target the device cannot hold: HR ±3 bpm, power ±2.5%, pace ±5 s/km, cadence ±3 rpm. A target already written as a range (or a zone) is left unchanged.

10. Comments

The comments of the session are under the target data (and under the description on a phone). You can attach files to them.
Note: on a computer, when the description of the session is in editing mode, several tabs appear on the left… The comments are then in the Info tab.

11. On a phone

The page of the session fills the screen. The description shows read-only: Edit opens it in full screen, where Insert gives access to the Intervals and the Snippets. Going back first closes the description editor, then the page.
Print and Raw text mode are in the menu of the page, not in the header of the description as on a wide screen.

12. Hidden sessions

Without a Premium subscription, the content of some sessions is hidden: the sessions planned after the end of your subscription, and squad sessions older than two weeks. The session stays in the calendar, but you can neither read nor edit it.

13. Sharing a session (coaches)

Share the workout plans the same session for other athletes, picked one by one or by groups. The copies stay linked: when you edit the session, it changes for everyone. To adapt it to a single athlete, use Individualize, in the sharing window.

14. Recurring workouts and check-ins

A planned session or a check-in can be made recurring with the Recurrence button: it is then replicated every week until the end of the season.
When editing, moving or deleting, Slek asks you to choose: this workout only or this workout and the following ones. Do not repeat stops the recurrence and deletes the following sessions.